Euro Manufacturing and Marketing Ltd
UK Manufacturers of
Battery Management Systems,
DC-
E1146 24AMP BATTERY CHARGER 12V -
Specification
The Charger starts when the voltage
reaches approximately 13V.
This Unit = 2 X E931 12A Battery Chargers wired in parallel to form a single 24A module
The Battery Charger can be wired in 2 ways:-
Wired as a fully automatic Charger
The Pink Control Wire Connection is wired directly to the +ve Connection of the 12V Cranking (Donor) Battery to switch the Charger on and off automatically.
In this case the Control Wire Connection senses the 12V Cranking (Donor) Battery Voltage and switches the Charger on only when the 12V Cranking (Donor) Battery is being charged.
The Unit automatically controls the maximum charge into the 12V Leisure (Recipient) Battery preventing it from becoming over-
Wired as a manually operated Charger
The Pink Control Wire Connection is wired via a Switch to the +ve Connection of the 12V Cranking (Donor) Battery to switch the Charger on and off manually.
In this case the Operator can control when the Battery Charger is switched on or off.
If left on, the Unit will automatically control the maximum charge into the 12V Leisure (Recipient) Battery preventing it from becoming over-
This Unit can be provided with
a Charging Indicator.
To request a Charging Indicator,
please add an "L" to the
Part Number, i.e.: E1054-
Also available from this range:
12A 12V -
36A 12V -
48A 12V -
60A 12V -
72A 12V -
Please contact us if you require a higher current rating than those shown
| DC-DC Voltage Converters |
| DC-DC Battery Chargers |
| Battery Management |
| Marine |
| Safety |
| Lighting |
| Horsebox Electrics |
| Forklift Electrics |
| Gritter Voltage Dropper 24V to 12V |
| Step Up DC-DC Voltage Converters |
| 12V to 24V Voltage Converter |
| Step Down DC-DC Voltage Converters |
| 24V to 12V Voltage Converter |
| Trailer Voltage Converters |
| AVC19 Trailer Voltage Converter |
| E805 Trailer Voltage Converter |
| E1244 Trailer Voltage Converter 260W |
| Battery Monitors |
| 12V Battery Management System |
| 24V Battery Management System |
| Split Charge Control Units |
| Voltage Sensitive Switches |
| Battery Status Indicators |
| Voltage Regulators |
| 12V Split Charge Controller |
| 12V to 24V Split Charger |
| 24V Split Charge Controller |
| 24V to 12V Split Charger |
| E1154 10A 12V-24V Split Charger (13V Turn On) |
| E1155 20A 12V-24V Split Charger (13V Turn On) |
| E1042 12v 200A Split Charge Controller |
| E038 24v Split Charge Controller |
| E1158 12A 24V-24V Split Charger (26V Turn On) |
| E1159 24A 24V-24V Split Charger (26V Turn On) |
| E1152 24V-12V 15A Split Charger (26V Turn On) |
| E1153 24V-12V 30A Split Charger (26V Turn On) |
| E1198 24V-12V 45A Split Charger (26V Turn On) |
| E1040 1A Voltage Sensitive Switch |
| E1049 1A Voltage Sensitive Switch |
| E1056 1A Voltage Sensitive Switch |
| E943 12V Battery Status Indicator |
| E1107 12V and 24V Battery Status Indicator |
| E1096 12V 15A Voltage Regulator |
| E1297 12V 30A Voltage Regulator |
| E936 Galvanic Isolator |
| 12V Boat Battery to Battery Chargers |
| 24V Boat Battery to Battery Chargers |
| E1047 12v + 24v Digital Speed Switch |
| E1048 12v + 24v Digital Speed Switch |
| E1109 24V Dim Dip (Danor 24VHDP/5, 24VHDP/3, 113813-2) |
| E1121 Electronic Flasher (Danor 408834-3) |
| E1122 Electronic Flasher (Danor 408838-9) |
| E1260 Electronic Flasher (Danor C100, ERF 111004-8) |
| 24V to 12V Horsebox Battery Chargers |
| 12V to 12V Horsebox Battery Chargers |
| 24V to 24V Horsebox Battery Chargers |
| 24V to 12V Horsebox Voltage Converters |
| 24V to 12V Forklift Voltage Converters |
| 36V to 12v Forklift Voltage Converters |
| 48V to 12V Forklift Voltage Converters |
| 72V to 12V Forklift Voltage Converters |
| E921 48V Forklift Power Flasher |
| New Products |
| E772 used in Drag Racing Car |
| E1116 PTO Warning Light Control Box |